Tried to run it. Got prompted to install a suitable JRE.
Went to Sun and downloaded the "Java Runtime Environment (JRE) 6u1" (online install version)
Installed the JRE ("Typical Setup")
Ran the install tool for Cidero (used default settings)
cd'd into C:\Program Files\Cidero\db\radiodb\AllStations\
Copied AmpedOut to SlimServer
Right-clicked on SlimServer and chose "Open with" and Notepad
In the dc:creator and dc:title lines, changed "Amped Out" to "Slimserver"
Changed the dc:description content to "Joat's Slimserver"
Changed the URL in the dc:relation line to http://192.168.1.175:9000
Changed "x-scpls" to "mpeg" in the first res line
Changed the bitrate from 16384 to 8192. 16384 is for playing 128kb streams, 8192 is for 64kb streams. Most of the podcasts I listen to are 64kb. You can add additional res lines for different bit rates but it might be a good idea to identify them with different names (you'll probably need separate playlists on the Slimserver also)
Changed "http://www.ampedout.net/ampedout-128k.pls" to "http://192.168.1.175:9000/stream.mp3" in the first res line
Delete the second res line
Saved the file and exited Notepad
Started RadioServerProxy from the Start menu
Started MediaController from the Start menu
Under Media Servers in the "Cider UPnP A/V Controller" Window, click on CiderRadio
Under CiderRadio, click on the little toggle next to AllStations
Under AllStations, click on the toggle next to SlimServer
Click on "Slimserver - MPEG/64k" (this will add it to the right-hand window)
Assuming that your DSM-320 is turned on, it should show up in the "Media Renderers" window as "My Media Player" (if you didn't change the default setting on the DSM-320). Single click on that to bring up the player window.
Back in the "Cidero UPnP A/V Controller" Window, under the Music Tab (right hand side), single click on the Slimserver entry to highlight it
Click on the "Add Tracks to Play Queue" button. This should add Slimserver to the playlist in the "My Media Player" window
Click on the Play button in the "My Media Player" window. You should see the timer start counting.
Make sure your Slimserver is running. Point a browser at http://192.168.1.175:9000 (or whatever the IP address is where you installed the Slimserver software.
There should be an IP address in the upper right-hand corner of the browser. Make sure that it's the IP for the system where you installed Cidero.
Choose a music source in Slimserver and add it to the MusicPlayer playlist by clicking on the little play button next to your selection.
Click on "Play" under "Music Player".
If the counter in the Cidero "My Music Player" window is incrementing and you don't hear any sound, wait a minute or so. There will be a 5-10 second delay between hitting play and hearing sound. If the no-sound situation persists, make sure that something is in the Slimserver playlist and that the IP address for the computer where you installed Cidero is installed.
Don't forget to bring up the Slimserver web interface, select your computer's IP in the upper right window, add music/podcasts to the playlist (bottom right) and click "Play" under "Music Player"
Go see if you hear any music coming out of whatever the DSM-320 is hooked to.
I'll do a short video on this (like IronGeek) if anyone's interested.
The MS Surface ad has always irked me. Yeah, it's innovation (in the marketing sense: they're selling it first) but it's not invention. The technology has been around for a couple years (and MS didn't own it, invent it, or until lately, support it). Maybe that's why I find the following video funny?
Another thought: this is an interface for non-geeks. I mean, how many times can you reach for objects, in a manner such as those in the video, before your shoulder gives out?
Face it. Power geeks work/play by moving as little as possible. Sometimes by twitching.
While some may argue that it doesn't qualify because it looks like it used amplifiers, it is still an impressive achievement, given the line-of-sight limitations of 802.11. 237 miles, where both ends are on the ground, is not an easy thing to do.
PDF-based slide set is embedded in the Wired article.
In playing with a really old DSM-320 that I've repeatedly neglected to throw out, I figured out how to stream my own media to it without having to run Windows and D-Link's MediaServer:
Choose one of the files and copy it to SlimServer.xml.
Edit SlimServer.xml. The "res" line is the only important one. It should read something along the lines of <res protocolInfo="http-get:*:audio/mpeg:*" bitrate="16384">http://192.168.1.175:9000/stream.mp3</res>
Delete any other "res" lines.
Check the file permissions. Make sure that SlimServer has the same owner and permissions as the other xml files in the same directory.
If Cidero is already running, kill it. (Stopping and starting from the main menu does not work. Kill the binary.)
Fire up SlimServer.
Start Cidero and find the SlimServer entry (you probably should customize the other data in SlimServer.xml to make it easier to find)(or delete some/most of those other radio stations).
Use Cidero to tell the DSM-320 to start playing the stream (you have to choose the feed, select the renderer, add the feed to the renderer's play queue, highlight the line in the renderer's playlist, and hit the renderer's play button).
Go check your DSM-320. It should be playing whatever's being passed through the SlimServer.
I had a thought this afternoon that's been bugging the heck out of me: just where are all of the bugs in Safari coming from? The OS X version doesn't have them. Could it be that the bugs are in the underlying libraries? If so, are those libraries property of MS? If so, have most of the patches to IE been work-arounds, installed in the browser, to mask the bugs in the libraries?
One of the shortcomings with Slimserver (I was wrong in an earlier post) is that Slimserver doesn't work well with a high number of listeners. The audio gets very choppy. However, it's not a problem for me as I don't tend to run more than one client at any given time.
In thinking about running a client for either end of the house (small sound system in the bedroom, bigger sound system in the den), I needed to test if two could be easily slaved to the Slimserver.
Following the Streaming from Slimserver to Icecast howto from the Slim Devices web site, I was able to stream from LastFM to the Slimserver to MuSE to Shoutcast to the two clients, one running mpd, the other running vlc. (Read the howto for the description of why MuSE is needed.)
Keeping in mind that all of this software was running on a moderately powerful dual core system, I have the following statement (recommendation?): the configuration is "doable". However, I don't recommend it for the less-than-heavy geeks as it's definitely a finicky setup (it's not low maintenance).
Most of the issues I experienced (segfaults and just-not-working situations) centered on MuSE. Does anyone know of a workable substitute for MuSE (the Multiple Streaming Engine, not the publishing environment or the midi sequencer)?
I've organized and added more to the notes for the NSLU2/MPD/SlimServer page in the wiki. I've also added a list of the changes that I made to my version of MPD::Client.
A friend convinced me to try out Jaiku. I don't really grok it yet but I managed to snag joat.jaiku.com so it ain't all bad (I usually end up fighting 3 or 4 other joats for handles). In any case, if you're interested in aggregating feeds from the blog, wiki, and Del.icio.us, use this feed from Jaiku.
Next step: figure out how to export SageTV feeds into Jaiku.
Well, after a month of tinkering with the Chan_Skype software, I've decided to discontinue working with it due to a number of issues: non-locatable timeout, lockups of the VM when a call comes in from Skype, and overall annoyance with having to run a dedicated VM just to support the functionality.
If anyone can recommend a better Skype-to-Asterisk bridge method, please let me know. In the mean time, I will experiment with whatever I can find and will post my notes here.
